Floor-mounted pull-out units
Our pull-out units are supplied ready assembled and fully tested.
Features
Click the buttons and read more about features
85%
PULL-OUT CAPACITY
CAN BE LOADED WITH:
– PALLET JACK
– STACKER
– FORKLIFT
AUTOMATICALLY LOCKS
in the retracted position
You have the OPTION to choose side handles, available with or without the Easy Actionâ„¢ feature, foot-operated locks, and removable handles.
LOAD
CAPACITY
UP TO 1500 KG
GUIDE BEARINGS ensure that
THE UNITS STAY ALIGNED
when pulled out and can be
effortlessly pushed back in
Guide bearings also
PROTECT THE UNIT FROM
BEING DISLODGED in the
event of side impacts
LOW PROFILE!
Only 72 mm high. Easy to load
with a traditional pallet jack
Video
Floor-mounted (FM) units fit under the rack and are compatible with almost any type of pallet racking, but can also be used as freestanding units.
They are fixed to the floor with bolts through the lower frames, which act as rails for the upper frames to slide out on bearings, and are supported by high quality pallet truck wheels at the front. Being able to pull the units out of the rack allows for safe and easy access to stored goods!Cost-saving ergonomics are a primary consideration with FM units, as with all Smart Storing designs. Each model uses the right sizes and numbers of quality ball bearings, so they’re strong, reliable and easy to slide in and out. Guide rails ensure the units stay in line when pulled out, and can be pushed back in without effort.
A safety latch is automatically engaged when the unit is in the rack. This prevents the unit from being unintentionally pushed out from the other side of the rack. (This feature is especially important when using rear loaded units or units placed in a double rack, where they can be hit from behind when loading the opposite unit).
Floor-mounted 85%
Pull-out Capacity
Floor-mounted units
Pallet Size | Loading | Orientation | 800kg | 1000kg | 1200kg | 1500kg |
---|---|---|---|---|---|---|
EUR | Front Loaded | Short-side Handled | 13 801 | 13 1001 | 13 1201 | 13 1501 |
EUR | Rear-Loaded | Short-side Handled | 13 802 | 13 1002 | 13 1202 | 13 1502 |
EUR-L | Front Loaded | Long-side Handled | 13 805 | 13 1005 | 13 1205 | 13 1505 |
EUR-L | Rear-Loaded | Long-side Handled | 13 806 | 13 1006 | 13 1206 | 13 1506 |
FIN | Front Loaded | Short-side Handled | 13 803 | 13 1003 | 13 1203 | 13 1503 |
FIN | Rear-Loaded | Short-side Handled | 13 804 | 13 1004 | 13 1204 | 13 1504 |
FIN-L | Front Loaded | Long-side Handled | 13 807 | 13 1007 | 13 1207 | 13 1507 |
FIN-L | Rear-Loaded | Long-side Handled | 13 808 | 13 1008 | 13 1208 | 13 1508 |
HMU (wire mesh Container) | Front-Loaded | Short-side Handled | 13 809 | 13 1009 | 13 1209 | – |
HMU (wire mesh Container) | Rear Loaded | Short-side Handled | 13 810 | 13 1010 | 13 1210 | – |
HMU-L (wire mesh Container) | Front-Loaded | Long-side Handled | 13 811 | 13 1011 | 13 1211 | – |
HMU-L (wire mesh Container) | Rear Loaded | Long-side Handled | 13 812 | 13 1012 | 13 1212 | – |
Front loading
Rear loading
Heavy metal unit (HMU)
Floor mounted pull-out units | Product range
Handles for floor-mounted units
ART. NO. | SPECIFICATION |
---|---|
13-15 | Standard handle, 500 mm |
13-17 | Standard handle, 700 mm |
13-19 | Standard handle, 900 mm |
13-25 | Easy Actionâ„¢-handle, 500 mm |
13-27 | Easy Actionâ„¢-handle, 700 mm |
13-29 | Easy Actionâ„¢-handle, 900 mm |
13-35 | Detachable handle including foot lock, 500 mm |
13-37 | Detachable handle including foot lock, 700 mm |
13-39 | Detachable handle including foot lock, 900 mm |
13-4 | Foot lock |
FOOT-OPERATED RELEASE CATCH
Used with, for example, HMU models when a side handle is not suitable. Delivered complete with floor stop.
REMOVABLE HANDLE
Suitable if you have material protruding beyond the pallet, and the handle gets in the way during loading or unloading. Delivered complete with floor stop and foot lock.
STANDARD HANDLE
A handle with a built-in locking function that keeps the floor-mounted model in place when you load it. Delivered complete with a floor stop.
EASY ACTIONâ„¢ -HANDLE
A clever mechanism enables the handle to function like a lever, reducing the force required to extract a heavy pallet. WORKS LIKE A LEVER for best ergonomics!
Floor mounted pull-out units | Accessories
Steel shelf panels
An accessory that covers the top of the pull-out unit. With this, you can store plastic bins, cardboard boxes, production tooling or loose items. It’s also possible to store pallets directly on the steel shelf panel, providing flexible storage. Material: Galvanized steel.
ART. NO. | SPECIFICATION |
---|---|
13 180-0 | Steel shelf panel for short-side handled EUR unit |
13 180-6 | Steel shelf panel for long-side handled EUR unit |
Extra pallet support bar
To enhance the load-bearing capacity, add a pallet support bar that includes an extra wheel. This accessory provides crucial support for the pallet’s center skid during high loads, particularly beneficial when using plastic pallets or when placing a steel shelf panel on top.
ART. NO. | SPECIFICATION |
---|---|
13 001-0 | Extra support bar for short-side handled EUR & FIN unit |
13 001-1 | Extra support bar for long-side handled EUR unit |
13 001-1F | Extra support bar for long-side handled FIN unit |
Antiskid tape
Four pieces of self-adhesive tape at each corner. The tape has a rough surface which grips the pallet and prevents it from sliding around when empty or lightly loaded.
ART. NO. | SPECIFICATION |
---|---|
11 002-0 | Set of 4 pcs |
Upright protectors Smart 400
Standard upright protectors are often bulky and might limit the inside width so floor-mounted pull-out units will not fit. The slim upright protector Smart 400 will solve this problem! Height 400 mm, depth 490 mm. Powder coated yellow.
ART. NO. | SPECIFICATION |
---|---|
13 401249 | Width 120 mm (for post width 80 – 100 mm) |
13 401349 | Width 130 mm (for post width 90 – 110 mm) |
13 401549 | Width 150 mm (for post width 110 – 130 mm) |
Pallet collar kit
By storing small items directly on your floor-mounted pull-out unit, without a pallet, you can save even more space in height. The pallet collar can be complemented with pallet collar dividers. See page 114 for Pallet Accessories.
ART. NO. | SPECIFICATION |
---|---|
13 180-80 | Pallet collar with cut brackets, steel shelf panel and extra support bar |
Installation template
Steel plate with handles and predrilled holes. This accessory is a huge time saver when drilling the holes in the floor to receive the expanding bolts to secure FM units. Simply line up as many templates as you need – either 2 or 3 depending on how many pallet places there are between the uprights in your rack – and mark the holes easily and accurately – no need to measure!
ART. NO. | SPECIFICATION |
---|---|
13-MP | Installation template, specify the article number of the floor model to be used for the template when ordering |
Pallet Size and orientation
CONVERT A BEAM-MOUNTED UNIT INTO A FLOOR-MOUNTED MODEL
- – If the floor surface is too uneven for the wheels.
– If the floor is not level.
– If you desire pull-out units to be positioned at a higher level to enhance picking ergonomics.
– If you require 100% pull-out capacity, even though 85% is often sufficient for full access.
EUR-pallet |
FIN-/ CHEP-pallet |
Wire mesh container |
|
---|---|---|---|
EURShort-side handling 1200mm x 800mm (LxW) |
FINShort-side handling 1200mm x 1000mm (LxW) |
HMUShort-side handling 1200mm x 800mm (LxW) |
|
EUR-LLong-side handling 800mm x 1200mm (LxW) |
FIN-LLong-side handling 1000mm x 1200mm (LxW) |
HMU-LLong-side handling 800mm x 1200mm (LxW) |